Tel: +8613363187066
Product Categories
Contact Us

AnPing LongBao Wire Mesh Product Co.,Ltd

Paula Du

Email: paula_du@hotmail.com

Email: sales@lbwiremesh.com

Tel: 86-318-7502337

Mobile: 86-13363187066

Fax: 86-318-7502337

Address: 100meters South Of Hecao Village, Anping County, Hengshui,Hebei, China

News
You are here: Home > News > Content

How To Maintain The Barbed Wire Mesh In The Application?

Edit: Anping Longbao Wire Mesh Product Co.,Ltd    Date: Aug 29, 2017

How to maintain the Barbed Wire mesh in the application?
The use of Barbed Wire With the development of the economy has become more extensive, people in daily life and Barbed Wire is closely related, but many people do not know much about the performance of Barbed Wire, Barbed Wire maintenance to know less. Many people think that Barbed Wire is never rusty, Barbed Wire corrosion resistance is good. The reason is that the surface of the formation of a passivation film, in nature, it is more stable oxide of the existence of the form. In other words, although the Barbed Wire according to the use of different conditions, the degree of oxidation is not the same, but eventually have been oxidized, this phenomenon is usually called corrosion.
Barbed Wire mesh material surface dust and easy to remove dirt, and can be washed with soap, weak detergent or warm water. Barbed Wire mesh surface of the trademark, foil, with warm water, weak detergent to wash, binder ingredients, the use of alcohol or organic solvents (ether, benzene) scrub. Barbed Wire grease, oil, lubricating oil pollution, with a soft cloth wipe clean, later with a neutral detergent or ammonia solution or with a special detergent cleaning.
Barbed Wire surface with bleach and a variety of acid attached, rinse immediately with water, and then ammonia solution or neutral soda solution of sulfuric acid dip, washed with neutral detergent or warm water. Barbed Wire mesh surface with rainbow pattern, is too much use of detergent or oil caused by washing with warm water neutral detergent can be washed away. The rust caused by the dirt on the surface of the Barbed Wire mesh can be washed with 10% nitric acid or abrasive detergent and can also be washed with a special washing drug. As long as we use the correct maintenance method, you can extend the life of Barbed Wire, to keep its clean, bright, gorgeous style.
In the surface of the Barbed Wire mesh, the corrosion resistance is weak, and the pitting corrosion reaction is formed by the self-excited reaction, and the pores are close to each other to form a strong corrosive solution to accelerate the rate of corrosion reaction. As well as the intergranular corrosion cracking inside the Barbed Wire mesh, all of which have a damaging effect on the passivation film on the surface of the Barbed Wire mesh. So the surface of the Barbed Wire mesh must be regularly cleaned and maintained in order to maintain its gorgeous surface and extend the service life. When cleaning the surface of the Barbed Wire mesh, it is necessary to pay attention to the phenomenon of surface scratches, to avoid the use of bleach components and abrasive cleaning solution, Barbed Wire balls, grinding tools, etc., in order to get rid of the washing liquid, wash the surface and then clean the surface with clean water.
They are closely related to the Barbed Wire in daily life, especially the use of Barbed Wire with the economic development has become more extensive. But many people do not know much about the performance of Barbed Wire, the maintenance of the Barbed Wire to know a little more people think that Barbed Wire is never rusty. In fact, the Barbed Wire mesh corrosion resistance is good, because the appearance of the formation of a layer of passivation film, nature, it is more stable oxide of the existence of the form. However, due to the use of Barbed Wire conditions are different, the level of oxidation is not the same, the final Barbed Wire mesh will be oxidized, this phenomenon is usually called corrosion.
The corrosive solution is formed in the passivation film of the Barbed Wire mesh, and the pitting corrosion reaction is formed by the self-excited reaction, and the chloride ion is close to each other to form a strong corrosive solution to accelerate the rate of corrosion reaction. As well as the intergranular corrosion cracking inside the Barbed Wire mesh, all of which have a damaging effect on the passivation film on the surface of the Barbed Wire mesh. Therefore, the appearance of the Barbed Wire mesh must be regularly cleaned to maintain its gorgeous appearance and extend the service life.
How to clean the Barbed Wire? We can provide two ways:
Weak detergent or warm water. The appearance of the Barbed Wire mesh, the film or the appearance of the Barbed Wire mesh, and the soap that is easy to remove from the dirt. Wash with warm water, weak detergent, binder ingredients, use alcohol or organic solvents (ether, benzene) scrub. Barbed Wire grease, oil, oil pollution, with a soft cloth wipe clean, later with a neutral detergent or ammonia solution or with a special detergent cleaning. And then immediately rinse with water, Barbed Wire mesh appearance, such as bleach and a variety of acid attached. And then ammonia solution or neutral carbonic acid soda solution dip, with a neutral detergent or warm water washing.
When cleaning the appearance of the Barbed Wire mesh, it is necessary to pay attention to the phenomenon of surface scratches, to prevent the use of bleach ingredients and abrasive cleaning solution, Barbed Wire balls, grinding tools, etc., in order to remove the washing liquid, wash the end of the surface with clean water.

Anping Longbao Wire Mesh Product Co.,Ltd